Objectives
- Pump enclosure for two prominent dosing pumps complete with one suction and one discharge manifold complete with power distribution and control integration to site ICC.
- Installation of 12mm x 9mm double walled PTFE tubes
- Mounting and locating of the new dosing cabinet on site
- Field installation and testing
O&M documentation
- Installation & Maintenance Instructions
- Commissioning & Testing Procedur
Dosing Cabinet | |
Manufacture | HTS Engineering |
Model | N/A |
Dimension | 600mm x 500mm x 600mm High |
Door | Clear lift off |
Pump | 2 x Dosing Pumps (assume gamma/X metering pumps or similar free issue)
2 x pump base’s 150mm x 300mm x 10mm |
Manifold – Suction | 1 to 2 |
Manifold – Discharge | 2 to 2 |
Power | 110V Single phase– 2 x Plug & Socket – common supply |
Control | >100V– 2 x 2 pin Plug & Socket – common single pair control interface |
Drainage Valve | Not Required – Self Draining not bunded |
MOC | Polypropylene – 10mm thick, beige |
Frame | 1000mm High Support Frame |
Environment | IP66 –50 °C … +150 °C |
Standards Required | N/A |
Overview | TBC
|